GE EP Series Przewodnik Instalacji Strona 5

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 6
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 4
2
4
3
On the 1st luminaire, disconnect the right-side
suspension wire and “Y” shape suspension wire.
Then on the 2nd luminaire, disassemble the
left-side “Y” shape suspension wire (this one will
not be used).
Join 1st and 2nd luminaires together by fastening
the brackets on the modied “Y” shape suspension
wire from Step 9. Fasten brackets using four
M8 screws. Screw torque should be between
15.3±0.8kg f.
Attach a bracket to each end of the “Y” shape
suspension wire using washer, spring washer
and M8 nuts. Screw torque should be between
15.3±0.8kg f.
For multiple units installed in series, all canopy sets will have a power cable except the last canopy.
Optional Mounting Method - Connecting Suspended Fixtures in Series
Reattach suspension wire to “Y” shape suspension
wire. To adjust height and to level a xture, squeeze
the tip of the gripper and pull the suspension cable
to the desired height. Clip the cable with cable
cutters to nish the appearance.
5
Squeeze tip to adjust
1st luminaire
Remove “Y” shape wires
“Y” shape
suspension wire
Bracket
Disconnect
suspension wire
2nd luminaire
Canopy set without power cable
Canopy sets with power cable
1
Przeglądanie stron 4
1 2 3 4 5 6

Komentarze do niniejszej Instrukcji

Brak uwag